Site Map
Back to Tool KingTool King Sale Items and Top Products From Tool King
AdvertiserIds = 1729448
Available at Tool King for only $ 554.99 (USD)
-WallWalker eliminates the need for makeshift scaffold. Now with WallWalker's patented hanging scaffold, you will save time and build smarter. With quick setup and easy adjustments, the WallWalker has unlimited uses.
Available at Tool King for only $ 64.99 (USD)
Work bench and guard rail holder combo substantially cut work time with a workbench attached to the pump jack scaffold. Attaches to Pump Jack Model # 2200PSaves time and money.Bring tools and material up the scaffold with you.Guardrail holder included.
Available at Tool King for only $ 49.99 (USD)
The Qual Craft QS50 is a Quick Support Pole. It simplifies working on ceilings and sloping walls when fixing panels, boards and drywall. The product features a thumb activated lever on the tool that extends the support arm to ceiling height automatically and allows the device to be repositioned and tensioned with just one hand in a matter of seconds. Top and Bottom heads pivot up to 50 to accommodate sloping walls / ceilings and other applications. It has a maximum load capacity of 110 lbs. It opens by turning the base counterclockwise and easily telescopes to the desired height then locks by turning in the opposite direction.
Available at Tool King for only $ 69.99 (USD)
Steel Construction for added strength.Use inside or outside ladder face. No more than 8 feet spacing between ladders using 2 thick wood planking. Fits single or double side rail ladders. Not recommended for use on fiberglass ladders.Not to be used over 20 feet in height. ( 16ft. in California).
Available at Tool King for only $ 6103.99 (USD)
The Quincy 146510-014 is a 10 HP One Stage Rotary Screw Compressor with 3 Phase.
Available at Tool King for only $ 2830.99 (USD)
The Quincy P2103DS12HCB23 is a 10 HP 2-Stage Industrial Stationary Air Compressor. The 3 phase compressor has 120 gallon capacity. The 2 stage cast iron compressor is a splash lubricated stationary unit. It also has ASME cooled relief valve in interstage, discharge line & tank.
Available at Tool King for only $ 2474.99 (USD)
The Quincy 251CS80VCBFL is a 5 HP 2-Stage Industrial Stationary Air Compressor. The two-stage cast-iron compressor features splash lubrication. The compressor features ASME coded relief valve in discharge line and tank.
Available at Tool King for only $ 4571.99 (USD)
The Quincy 146510-010 is a 7.5 HP One Stage Rotary Screw Compressor with 3 Phase. With a continuous 100% duty cycle, this rotary screw compressor operates without the elevated vibration and sound levels normally associated with typical piston compressors. A small footprint and lower sound levels mean increased installation flexibility, making it ideal for most applications.
Available at Tool King for only $ 4575.99 (USD)
The Quincy 146510-002 is a 5 HP One Stage Rotary Screw Compressor with 1 Phase. With a continuous 100% duty cycle, this rotary screw compressor operates without the elevated vibration and sound levels normally associated with typical piston compressors. A small footprint and lower sound levels mean increased installation flexibility, making it ideal for most applications.
Available at Tool King for only $ 4947.99 (USD)
The Quincy 2153D12HC46FL is a 15 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Available at Tool King for only $ 4947.99 (USD)
The Quincy 2153D12HC23FL is a 15 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Available at Tool King for only $ 1785.99 (USD)
The Quincy G18H17PC58 is a 8 HP Four-Cylinder Gasoline Contractor Air Compressor. It has Honda gasoline engine. It also has pneumatic wheel with air leak sealant. The compressor features ASME coded relief valve in discharge line and tank.
Available at Tool King for only $ 2704.99 (USD)
The Quincy 273D80VCB46FL is a 7.5 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Available at Tool King for only $ 600.99 (USD)
The Air Star by Quincy Compressor delivers superior performance at an economical price. Whether you are looking for a compressor to build a home, or for use around the home, choose Air Star for performance and value.
Available at Tool King for only $ 1690.99 (USD)
The Quincy 251CP80VCB is a 5 HP 2-Stage Industrial Air Compressor with Switch/Starter. The 1 phase compressor runs slower, cooler and quieter, while delivering more usable air than competitive models. This means less maintenance, longer life and enhanced durability.
Available at Tool King for only $ 3552.99 (USD)
The Quincy 2103D12HC46FL is a 10 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Available at Tool King for only $ 4072.99 (USD)
The Quincy 146510-004 is a 5 HP One Stage Rotary Screw Compressor with 3 Phase. With a continuous 100% duty cycle, this rotary screw compressor operates without the elevated vibration and sound levels normally associated with typical piston compressors. A small footprint and lower sound levels mean increased installation flexibility, making it ideal for most applications.
Available at Tool King for only $ 407.99 (USD)
The Quincy 12X4PN is a 2 HP Splash Lubricated Air Compressor. It has the CFM delivery of the 2 HP hand carry unit with the ease and portability of a wheeled portable unit. It features 4 gallon receiver tank with metal rimmed wheels.
Available at Tool King for only $ 810.99 (USD)
The Air Star by Quincy Compressor delivers superior performance at an economical price. Whether you are looking for a compressor to build a home, or for use around the home, choose Air Star for performance and value.
Available at Tool King for only $ 3552.99 (USD)
The Quincy 2103D12HC23FL is a 10 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Available at Tool King for only $ 39.99 (USD)
-Galvanized steel body provides extra support and strength in the center and bottom of the box, where you need it-Large 26" width can hold a 24" level-Impact resistant top and end caps protect against bumps and abrasions-Nickel plated, steel latches and full-length steel piano type hinge provide greater strength and security-Fully lockable-Molded in side handles allow for two handed carry-Plastic end caps lift the steel body off the ground which reduces the chance of scratches or abrasions to the bottom of the tool box
Available at Tool King for only $ 119.27 (USD)
-Three full-sized drawers plus large bulk storage area-Galvanized steel, tread plate drawer fronts and panel-Impact-resistant work surface
Available at Tool King for only $ 9.99 (USD)
-Easy scoop design for convenient access to small parts.-Clear see-through lid allows you to see the contents at a glance.-Cover firmly snaps shut to securely contain contents.-Molded in handle for easy portability.
Available at Tool King for only $ 119.99 (USD)
Locking Single-Sleeve Carbide Chuck - To hold bits securely2-speed Transmission - For matching power to the task24-Position Clutch – Finer torque adjustment and repeatabilityHammer Function and High-Speed Gear Box - To break through masonry and concrete workAutomatic Spindle Lock - Makes bit changes easierDie-Cast Gear Housing - For added durabilityDirection of Rotation Selector - Forward/reverse/center lock for versatility and safety
Available at Tool King for only $ 49.99 (USD)
Soft Start and Pad Brake - For a gouge-free workpieceElectronic Speed Control - 7,000 to 12,000 OPM (no load speeds)Through-Body Sealed Slide Switch - For reliability and ease of usePermanent Magnet Motor™ - Maintains constant speed and power under loadMicro Fiber™ Hook and Loop Pad - Paper fits snug for improved sanding efficiencyOn-Board Vacuum Adapter - For 1-1/4" and 2-1/4" vacuum hoses to keep work area cleanDust Bag - Attaches to sander to keep dust to a minimumErgonomic Design - Provides comfortable handling and ease of grasp when operating in different positions and anglesLighted Plug - Helps easily identify live toolsPower Cord - 12' with built-in cord wrap for convenient storage
Available at Tool King for only $ 119.99 (USD)
Locking Carbide Chuck - To hold bits securely24-Position Torque-Adjustment Ring - Finer adjustment and repeatabilityDie-Cast Gear Housing - For added durability2-Speed Transmission - For matching power to the taskAuxiliary Handle Assembly - For ease of operation and to prevent loss of controlBit Storage - On-board for easy accessKey-Hole Hanging Charger - Can be hung for convenient, space-saving storageDirection of Rotation Selector - Forward/reverse/center lock for versatility and safetyKeyless Chuck - Allows you to hand-tighten or release the drill bit
Available at Tool King for only $ 185.99 (USD)
Straight Drive™ Feature - Enhances drive quality and roof qualityReplaceable Nosepiece with Carbide Inserts - For easy maintenance and extended tool lifeEZ Load™ Feature with Offset Magazine - For quick reloadingTool-Free Shingle Guide Adjustment - Allows for precise placement of shinglesAdjustable Exhaust - Operator can choose best placement for removal of debrisTool-Free Depth of Drive Adjustment - Lets you select precise driving depth of the fastenerIn-Handle Air Filter - Self-cleaning to keep debris out of the tool for an extended lifeInternal Piston Catch - Delivers consistent driving powerMuffler - Reduces noise during operationQuick-Connect Swivel Connector - Helps prevent hose tanglesReplaceable Nosepiece with Carbide Inserts - Makes maintenance easier to perform and extends the tool's lifeSelectable Trigger - Choose between contact actuation for higher productivity and single sequential actuation for precise fastener placementTool-Free Shingle Guide - For precise spacing of shingles
Available at Tool King for only $ 109.99 (USD)
1/2" Single-Sleeve Locking Carbide Chuck - Tightens bits quickly and securelyAutomatic Spindle Lock - Open and close chuck with one handHigh Impact Torque Adjustment Ring, 24-Position Clutch - For durability and lighter weightPatented Slide-In Battery Pack - Easily load and lock with one hand2-Speed Transmission - For matching power to the taskErgonomic Overmold Gripping Areas - Provides user comfort and better gripHigh-Capacity Lithium-Ion Batteries - Longer run time and more work per chargeLED Work Light - Makes it easier to work in dark corners
Available at Tool King for only $ 79.99 (USD)
15-Amp Motor - For heavy use situationsMagnesium Upper and Lower Blade Guard - Lighter weight and less user fatigueFull-Length Kerf Indicator - For more accurate cuttingExternally Replaceable Brushes - For minimum downtimePositive Bevel Stop at 45 and Quick-Release Button at 51.5 - For quick and easy setup and adjustmentSoft-Grip Shock-Absorbing Front Handle - For durability and comfortEdge Guide - For straight, angle, and bevel cutsSpindle Lock - Allows you to secure the blade with turning the blade screwDust Chute - To direct dust and chips away from the operator12' Power Cord - Has built-in cord wrap for easy storageLighted Plug - Helps easily identify live tools
Available at Tool King for only $ 299.99 (USD)
RapidMax Twin Charger - Charges 2 batteries in 30 minutes2 Max 2.5 Ah Batteries - With up to 34% more runtime than competition18-Volt Impact Driver - Features high-torque output for the toughest driving tasksReciprocating Saw - Has a stroke length of 1-3/16" and speeds of 0-2,500 RPMCenter-Handle 1/2" Hammer Drill - Runs at 25,600 BPM with 585 in. lb. of torque6-1/2" Circular Saw - With double-reduction gearing for high torqueLight - Comes with xenon bulb for excellent illumination
Available at Tool King for only $ 78.99 (USD)
Electronic Feedback - For consistent speed and powerReplaceable Brushes - Easily accessible external brush capsVariable Speed - Adjust speed to material type and application6 Amp Permanent Magnet Motor™ - For extra power in a compact sizeDepth Scale -Easy to read for quick set-upThumb Wheel Depth Adjustment - For easy depth setting1/4" Collet - Accepts most 1/4" bitsDie Cast Base - For greater durability and longevityToggle Switch - Features a soft start to prolong motor life and give the operator more controlLighted Plug - Helps easily identify live toolsEdge Guide - Keeps the bit a certain distance from the edge of a straight workpieceBearing Guide Assembly - Can be used to guide the bit on curved workpieces
Available at Tool King for only $ 124.99 (USD)
9-Amp Heavy-Duty Motor with Hardened-Steel Gears - Ensures tool longevitySpade Handle - Has 2 positions for control tailored to the projectTriple Gear Reduction - Increases torque for use with large diameter accessories5/8" Spindle - For increased strength in high torque applicationsEasily-Accessible Brushes - Can be serviced quickly for minimum down timeLock-On Button - For continuous drilling or mixingForward/Reverse Rocker Switch - Use for drilling or backing out jammed bitsAuxiliary Handle - Has 3 positions for ease of operation and to prevent loss of control12' All-Rubber Power Cord with Built-In Cord Wrap - For durability and convenient storage when not in useLighted Plug - Helps easily identify live tools
Available at Tool King for only $ 75.99 (USD)
8.5-Amp Motor with Hardened-Steel Gears - Ensures tool longevitySingle-Sleeve Keyless Chuck - Allows you to hand-tighten or release the drill bitLock-On Button - Convenient when drilling for extended periods of timeAll-Metal Gear Case - For durability360 Side Handle - Can be repositioned or moved for best use with application12' All-Rubber Cord with Built-In Cord Wrap - For durability and easy storage when not in useDirection of Rotation Selector - To change direction of bit rotation for versatilityLighted Plug - Easily identifies live toolsErgonomic 2-Finger Trigger - For comfortable and easy handlingErgonomic Soft-Grip Handle - For added comfort
Available at Tool King for only $ 219.99 (USD)
Hammer Drill/Driver - ZRR8411503Locking Single-Sleeve Carbide Chuck - To hold bits securelyHigh-Torque 2-Speed Transmission - For matching power to the taskHigh-Impact Torque-Adjustment Ring, 24-Position Clutch - For durability and lighter weightHigh-Speed Gearbox with Hammer Function - For masonry and concrete workAutomatic Spindle Lock - Makes bit changes easierReciprocating Saw - ZRR8442Tool-Free Blade Clamp - For quick blade changesPivoting Shoe - Adjusts for cuts at almost any angleVariable-Speed Switch with Brake - For the right speed to suit the taskCircular Saw - ZRR8452Aluminum Guard and Base - For high strength and low weight6-1/2" Carbide-Tipped Blade - For increased cutting capacitySpindle Lock - For easier blade changesDouble-Reduction Gearing - For increased torqueWork Light - ZRR849Very Bright Swivel Light - Direct light in any direction to illuminate the darkest spaces
Available at Tool King for only $ 25.99 (USD)
The Robinair 43230 is a Swivel-Head Digital Thermometer. The digital thermometer gives user full-feature capabilities in a case which is small enough to fit in shirt pocket. A wide temperature range and highly accurate readings make it useful for a variety of applications. The head on this digital thermometer swivels, making it easy to see readings at any angle. The compact size is convenient to carry and store. It has easy-to-read display which can be read even in direct sunlight. The durable case includes a cover to protect the probe. Min/Max display for reading temperature ranges.
Available at Tool King for only $ 38.99 (USD)
The Robinair 16253 is a 12 Pack of R-134a Fluorescent Dyes. The replacement Fluorescent dye is designed to give best performance with Robinair leak detection system. It shines a bright yellow or yellow-green in UV light.
Available at Tool King for only $ 299.99 (USD)
The Robinair 15434 is a CoolTech 2-Stage Vacuum Pump. It has heavy-duty motor and high torque design for easy startup and efficient operation. The oil fill port makes adding oil simple since the port is accessible from the front or either side. It has a sight glass on the front of the pump which shows user when enough oil has been added. The durable polycarbonate mobile base improves pump balance and minimizes vibration during operation. Gas ballast moisture laden air passing through the pump mixes with relatively dry air to such a degree that compression does not cause condensation. Its two-stage design cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so user can pull a deeper, ultimate vacuum.
Available at Tool King for only $ 290.99 (USD)
The Robinair 15500 is a VacuMaster 2-Stage Vacuum Pump. It has heavy-duty motor and high torque design for easy startup and efficient operation. The oil fill port makes adding oil simple since the port is accessible from the front or either side. It has a sight glass on the front of the pump which shows user when enough oil has been added. The durable polycarbonate mobile base improves pump balance and minimizes vibration during operation. Die-Cast aluminum housing makes the pumps lightweight but durable. Its two-stage design cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so user can pull a deeper, ultimate vacuum.
Available at Tool King for only $ 45.00 (USD)
The Robinair 75240 is a Coolant and Battery Refractometer. It can be used for measuring the freezing point of either propylene or ethylene glycol based cooling systems. It can also be used for checking the strength of electrolyte solution batteries. The precision instrument features high-quality optics with ultra smooth focusing.
Available at Tool King for only $ 88.99 (USD)
The Robinair 18021 is a A/C Clutch Plate Remover Kit. The handy kit contains clutch plate removers for a variety of popular A/C compressors. These tools can be used both for removing the clutch plate to gain access to the shaft seal and for re-installing it. The compact design makes it possible to work in tight spots and, in many cases; the tool can be used with the compressor mounted on the vehicle.
Available at Tool King for only $ 182.99 (USD)
Case of 12 bottles. Each bottle contains 16oz. of fluid. Each bottle treats one vehicle. For use with Robinair's TSS machine (ROB82000).
Available at Tool King for only $ 55.99 (USD)
The Robinair 17492 is a Vinyl Dust Cover for 342000, 17700-2K, 34700-2K, 34134Z, 34700Z, 34711-2K, AC375, AC375A, 17700Z and 34702Z. The heavy-duty vinyl dust cover protects the investment. It features corded seams for durability; medium gray color with CoolTech logo.
Available at Tool King for only $ 129.99 (USD)
The Robinair 16600 is an Electronic Refrigerant Leak Detector. It has 16" gooseneck probe which holds its position so user can operate the detector with one hand. An alarm increases in frequency as the tip gets nearer to a high concentration of refrigerant. The threshold balancing control gives user infinite control for eliminating background contamination so user can zero in on the leak site. The audible leak signal can be adjusted to the volume that's right for the background noise in the shop or at the job site.
Available at Tool King for only $ 1729.99 (USD)
The Robinair 75700 is a CoolTech Coolant Exchanger. It features 10 minute exchange process which means no more waiting for the engine to warm up. The engine off feature removes pulleys, belts and fan blades from the safety equation. The vacuum mode creates a push/pull exchange process allowing the technician to safely remove high pressure in a hot system. The Hands-off transfer of used coolant to a bulk tank prevents spills and helps protect the technician. It has two clearly marked valves and an easy-to-read gauge which make the machine very easy to use. The sight glass clearly shows the amount of coolant in the waste tank.
Available at Tool King for only $ 88.99 (USD)
The Robinair ROB41640 is a Side Wheel Manifold with Enviro-Guard Hoses and Quick Seal Fittings. The side wheel manifold is ready for almost every job, instead of carrying several manifolds with 1/4" fittings. The gauges show R-22 and R-134a temperature scales. The flexible holster provides protection against the bumps and knocks of everyday use. The pressure temperature chart stores in a slot on the back which gives multiple refrigerant capability.
Available at Tool King for only $ 169.99 (USD)
The Robinair 17506 is a 50 lbs Refrigerant Tank. The 50 lbs tank has 1/4" fittings. It is for 17800A, 17800-2K, 17700A, 25150, 25175, 25200B series.
Available at Tool King for only $ 1853.99 (USD)
The Robinair 17680-2K is a Universal Recovery Station for Contaminated or Mixed Refrigerant. It is a recovery-only unit designed for quickly capturing contaminated or unknown refrigerants, mixtures and blends, including sealants. It protects the recovery/recycling equipment and shops refrigerant supply. It can be recovered into one 50 lbs tank for collection and off-site disposal (mixtures and blends cannot be recycled). It is simple to hook up and operate with instructions printed on the control panel for quick reference. The refrigerant collected should not be used in any A/C system. When the tank is full, it should be sent to a disposal facility.
Available at Tool King for only $ 56.99 (USD)
The Robinair 13172 is a Spin-On Filter Maintenance Kit. It is used for keeping recovery and recycling units operating at peak efficiency with a convenient maintenance kit. It contains one quick change filter-drier to be used on both R-12 and R-134a stations and one 16 oz. bottle of premium high vacuum pump oil. The kit is for early models using 34724 Filter-Drier (17700A, 17700-2K, 34700, 34700-2K, 34800, 34800-2K, 34900 Series).
Available at Tool King for only $ 3399.99 (USD)
The Robinair 34700Z is a R134A Cool-Tech Recovery/Recycle/Recharge Unit for R-134a. The automatic air purge eliminates damaging air without any monitoring of gauges or opening of valves. The unit automatically drains system oil captured during recovery and the display reminds user to empty the bottle. The calibrations on the container clearly show user how much oil needs to be replaced. The scale is mounted internally for protection and has a dampening mechanism that protects against impact shocks such as movement over rough surfaces. The scale weighs recovered refrigerant and charges by weight for greatest accuracy. The refrigerant is recovered into and charged out of this vessel, which is permanently mounted to the electronic scale for continuing reliability.
Available at Tool King for only $ 64.99 (USD)
The Robinair 41620 is a R12 Side Wheel Manifold with Standard Hoses. It can be used with 41600 for almost every job, instead of carrying several manifolds with 1/4" fittings. The gauges show R-22 and R-134a temperature scales. Flexible holster provides protection against the bumps and knocks of every day use. The pressure temperature chart stores in slot on the back. It gives multiple refrigerant capabilities. The face seal valves give a tight seal, less wear and improved flow.
Qual Craft WW03844 8' Long Wall Walker with 44" Arm
Available at Tool King for only $ 554.99 (USD)
-WallWalker eliminates the need for makeshift scaffold. Now with WallWalker's patented hanging scaffold, you will save time and build smarter. With quick setup and easy adjustments, the WallWalker has unlimited uses.
Qual-Craft 2204P Pump Jack Work Bench Guard Rail Combination Accessory
Available at Tool King for only $ 64.99 (USD)
Work bench and guard rail holder combo substantially cut work time with a workbench attached to the pump jack scaffold. Attaches to Pump Jack Model # 2200PSaves time and money.Bring tools and material up the scaffold with you.Guardrail holder included.
Qual Craft QS50 Quick Support Pole
Available at Tool King for only $ 49.99 (USD)
The Qual Craft QS50 is a Quick Support Pole. It simplifies working on ceilings and sloping walls when fixing panels, boards and drywall. The product features a thumb activated lever on the tool that extends the support arm to ceiling height automatically and allows the device to be repositioned and tensioned with just one hand in a matter of seconds. Top and Bottom heads pivot up to 50 to accommodate sloping walls / ceilings and other applications. It has a maximum load capacity of 110 lbs. It opens by turning the base counterclockwise and easily telescopes to the desired height then locks by turning in the opposite direction.
Qual-Craft 2400P Steel Ladder Jack
Available at Tool King for only $ 69.99 (USD)
Steel Construction for added strength.Use inside or outside ladder face. No more than 8 feet spacing between ladders using 2 thick wood planking. Fits single or double side rail ladders. Not recommended for use on fiberglass ladders.Not to be used over 20 feet in height. ( 16ft. in California).
Quincy 146510-014 10 HP One Stage Rotary Screw Compressor, 3 Phase
Available at Tool King for only $ 6103.99 (USD)
The Quincy 146510-014 is a 10 HP One Stage Rotary Screw Compressor with 3 Phase.
Quincy P2103DS12HCB23 10 HP 2-Stage Industrial Stationary Air Compressor, 3 Phase, 120 Gallon
Available at Tool King for only $ 2830.99 (USD)
The Quincy P2103DS12HCB23 is a 10 HP 2-Stage Industrial Stationary Air Compressor. The 3 phase compressor has 120 gallon capacity. The 2 stage cast iron compressor is a splash lubricated stationary unit. It also has ASME cooled relief valve in interstage, discharge line & tank.
Quincy 251CS80VCBFL 5 HP 2-Stage Industrial Stationary Air Compressor, 1 Phase, 80 Gallon
Available at Tool King for only $ 2474.99 (USD)
The Quincy 251CS80VCBFL is a 5 HP 2-Stage Industrial Stationary Air Compressor. The two-stage cast-iron compressor features splash lubrication. The compressor features ASME coded relief valve in discharge line and tank.
Quincy 146510-010 7.5 HP One Stage Rotary Screw Compressor, 3 Phase
Available at Tool King for only $ 4571.99 (USD)
The Quincy 146510-010 is a 7.5 HP One Stage Rotary Screw Compressor with 3 Phase. With a continuous 100% duty cycle, this rotary screw compressor operates without the elevated vibration and sound levels normally associated with typical piston compressors. A small footprint and lower sound levels mean increased installation flexibility, making it ideal for most applications.
Quincy 146510-002 5 HP One Stage Rotary Screw Compressor, 1 Phase
Available at Tool King for only $ 4575.99 (USD)
The Quincy 146510-002 is a 5 HP One Stage Rotary Screw Compressor with 1 Phase. With a continuous 100% duty cycle, this rotary screw compressor operates without the elevated vibration and sound levels normally associated with typical piston compressors. A small footprint and lower sound levels mean increased installation flexibility, making it ideal for most applications.
Quincy 2153D12HC46FL 15 HP Two Stage Electric Stationary Compressor, 3 Phase
Available at Tool King for only $ 4947.99 (USD)
The Quincy 2153D12HC46FL is a 15 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Quincy 2153D12HC23FL 15 HP Two Stage Electric Stationary Compressor, 3 Phase
Available at Tool King for only $ 4947.99 (USD)
The Quincy 2153D12HC23FL is a 15 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Quincy G18H17PC58 8 HP Four-Cylinder Gasoline Contractor Air Compressor, 930 RPM
Available at Tool King for only $ 1785.99 (USD)
The Quincy G18H17PC58 is a 8 HP Four-Cylinder Gasoline Contractor Air Compressor. It has Honda gasoline engine. It also has pneumatic wheel with air leak sealant. The compressor features ASME coded relief valve in discharge line and tank.
Quincy 273D80VCB46FL 7.5 HP Two Stage Electric Stationary Compressor, 3 Phase
Available at Tool King for only $ 2704.99 (USD)
The Quincy 273D80VCB46FL is a 7.5 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Quincy AS111DC8PN 1.5 HP Standard Filter Air Compressor, 115/230V, 100 PSI
Available at Tool King for only $ 600.99 (USD)
The Air Star by Quincy Compressor delivers superior performance at an economical price. Whether you are looking for a compressor to build a home, or for use around the home, choose Air Star for performance and value.
Quincy 251CP80VCB 5 HP 2-Stage Industrial Air Compressor with Switch/Starter, 1 Phase
Available at Tool King for only $ 1690.99 (USD)
The Quincy 251CP80VCB is a 5 HP 2-Stage Industrial Air Compressor with Switch/Starter. The 1 phase compressor runs slower, cooler and quieter, while delivering more usable air than competitive models. This means less maintenance, longer life and enhanced durability.
Quincy 2103D12HC46FL 10 HP Two Stage Electric Stationary Compressor, 3 Phase
Available at Tool King for only $ 3552.99 (USD)
The Quincy 2103D12HC46FL is a 10 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Quincy 146510-004 5 HP One Stage Rotary Screw Compressor, 3 Phase
Available at Tool King for only $ 4072.99 (USD)
The Quincy 146510-004 is a 5 HP One Stage Rotary Screw Compressor with 3 Phase. With a continuous 100% duty cycle, this rotary screw compressor operates without the elevated vibration and sound levels normally associated with typical piston compressors. A small footprint and lower sound levels mean increased installation flexibility, making it ideal for most applications.
Quincy 12X4PN 2 HP Splash Lubricated Air Compressor, 115/230V, 125 PSI
Available at Tool King for only $ 407.99 (USD)
The Quincy 12X4PN is a 2 HP Splash Lubricated Air Compressor. It has the CFM delivery of the 2 HP hand carry unit with the ease and portability of a wheeled portable unit. It features 4 gallon receiver tank with metal rimmed wheels.
Quincy ASG15H8PN 5.5 HP Standard Filter Honda Air Compressor, 100 PSI
Available at Tool King for only $ 810.99 (USD)
The Air Star by Quincy Compressor delivers superior performance at an economical price. Whether you are looking for a compressor to build a home, or for use around the home, choose Air Star for performance and value.
Quincy 2103D12HC23FL 10 HP Two Stage Electric Stationary Compressor, 3 Phase
Available at Tool King for only $ 3552.99 (USD)
The Quincy 2103D12HC23FL is a 10 HP Two Stage Electric Stationary Compressor with 3 Phase. The compressor features ASME coded relief valve in interstage, discharge line and tank and high-efficiency intercoolers.
Remline DXG-26-1 26" Professional Galvanized Steel/Plastic Tool Box
Available at Tool King for only $ 39.99 (USD)
-Galvanized steel body provides extra support and strength in the center and bottom of the box, where you need it-Large 26" width can hold a 24" level-Impact resistant top and end caps protect against bumps and abrasions-Nickel plated, steel latches and full-length steel piano type hinge provide greater strength and security-Fully lockable-Molded in side handles allow for two handed carry-Plastic end caps lift the steel body off the ground which reduces the chance of scratches or abrasions to the bottom of the tool box
Remline DXPC-2603 3 Drawer Tread Plate Project Center
Available at Tool King for only $ 119.27 (USD)
-Three full-sized drawers plus large bulk storage area-Galvanized steel, tread plate drawer fronts and panel-Impact-resistant work surface
Remline SB-18 Yellow 17 Compartment Storage Box with Removable Dividers
Available at Tool King for only $ 9.99 (USD)
-Easy scoop design for convenient access to small parts.-Clear see-through lid allows you to see the contents at a glance.-Cover firmly snaps shut to securely contain contents.-Molded in handle for easy portability.
Ridgid ZRR8411503 Factory Reconditioned 18-Volt Cordless 1/2-Inch Hammer Drill/Driver Kit
Available at Tool King for only $ 119.99 (USD)
Locking Single-Sleeve Carbide Chuck - To hold bits securely2-speed Transmission - For matching power to the task24-Position Clutch – Finer torque adjustment and repeatabilityHammer Function and High-Speed Gear Box - To break through masonry and concrete workAutomatic Spindle Lock - Makes bit changes easierDie-Cast Gear Housing - For added durabilityDirection of Rotation Selector - Forward/reverse/center lock for versatility and safety
Ridgid ZRR2600 Factory Reconditioned 5-Inch Variable-Speed Random Orbit Sander
Available at Tool King for only $ 49.99 (USD)
Soft Start and Pad Brake - For a gouge-free workpieceElectronic Speed Control - 7,000 to 12,000 OPM (no load speeds)Through-Body Sealed Slide Switch - For reliability and ease of usePermanent Magnet Motor™ - Maintains constant speed and power under loadMicro Fiber™ Hook and Loop Pad - Paper fits snug for improved sanding efficiencyOn-Board Vacuum Adapter - For 1-1/4" and 2-1/4" vacuum hoses to keep work area cleanDust Bag - Attaches to sander to keep dust to a minimumErgonomic Design - Provides comfortable handling and ease of grasp when operating in different positions and anglesLighted Plug - Helps easily identify live toolsPower Cord - 12' with built-in cord wrap for convenient storage
Ridgid ZRR830153 Factory Reconditioned 14.4-Volt Cordless 1/2-Inch Drill/Driver Kit
Available at Tool King for only $ 119.99 (USD)
Locking Carbide Chuck - To hold bits securely24-Position Torque-Adjustment Ring - Finer adjustment and repeatabilityDie-Cast Gear Housing - For added durability2-Speed Transmission - For matching power to the taskAuxiliary Handle Assembly - For ease of operation and to prevent loss of controlBit Storage - On-board for easy accessKey-Hole Hanging Charger - Can be hung for convenient, space-saving storageDirection of Rotation Selector - Forward/reverse/center lock for versatility and safetyKeyless Chuck - Allows you to hand-tighten or release the drill bit
Ridgid ZRR175RNA Factory Reconditioned 1-3/4 Inch Pneumatic Roofing Coil Nailer
Available at Tool King for only $ 185.99 (USD)
Straight Drive™ Feature - Enhances drive quality and roof qualityReplaceable Nosepiece with Carbide Inserts - For easy maintenance and extended tool lifeEZ Load™ Feature with Offset Magazine - For quick reloadingTool-Free Shingle Guide Adjustment - Allows for precise placement of shinglesAdjustable Exhaust - Operator can choose best placement for removal of debrisTool-Free Depth of Drive Adjustment - Lets you select precise driving depth of the fastenerIn-Handle Air Filter - Self-cleaning to keep debris out of the tool for an extended lifeInternal Piston Catch - Delivers consistent driving powerMuffler - Reduces noise during operationQuick-Connect Swivel Connector - Helps prevent hose tanglesReplaceable Nosepiece with Carbide Inserts - Makes maintenance easier to perform and extends the tool's lifeSelectable Trigger - Choose between contact actuation for higher productivity and single sequential actuation for precise fastener placementTool-Free Shingle Guide - For precise spacing of shingles
Ridgid ZRR86006 Factory Reconditioned 18-Volt Lithium-Ion Cordless 1/2-Inch Compact Drill
Available at Tool King for only $ 109.99 (USD)
1/2" Single-Sleeve Locking Carbide Chuck - Tightens bits quickly and securelyAutomatic Spindle Lock - Open and close chuck with one handHigh Impact Torque Adjustment Ring, 24-Position Clutch - For durability and lighter weightPatented Slide-In Battery Pack - Easily load and lock with one hand2-Speed Transmission - For matching power to the taskErgonomic Overmold Gripping Areas - Provides user comfort and better gripHigh-Capacity Lithium-Ion Batteries - Longer run time and more work per chargeLED Work Light - Makes it easier to work in dark corners
Ridgid ZRR3200 Factory Reconditioned 7-1/4 Inch Circular Saw, 15 Amps
Available at Tool King for only $ 79.99 (USD)
15-Amp Motor - For heavy use situationsMagnesium Upper and Lower Blade Guard - Lighter weight and less user fatigueFull-Length Kerf Indicator - For more accurate cuttingExternally Replaceable Brushes - For minimum downtimePositive Bevel Stop at 45 and Quick-Release Button at 51.5 - For quick and easy setup and adjustmentSoft-Grip Shock-Absorbing Front Handle - For durability and comfortEdge Guide - For straight, angle, and bevel cutsSpindle Lock - Allows you to secure the blade with turning the blade screwDust Chute - To direct dust and chips away from the operator12' Power Cord - Has built-in cord wrap for easy storageLighted Plug - Helps easily identify live tools
Ridgid ZRR9223 Factory Reconditioned 18-Volt X2 Cordless 5-Piece Combo Kit
Available at Tool King for only $ 299.99 (USD)
RapidMax Twin Charger - Charges 2 batteries in 30 minutes2 Max 2.5 Ah Batteries - With up to 34% more runtime than competition18-Volt Impact Driver - Features high-torque output for the toughest driving tasksReciprocating Saw - Has a stroke length of 1-3/16" and speeds of 0-2,500 RPMCenter-Handle 1/2" Hammer Drill - Runs at 25,600 BPM with 585 in. lb. of torque6-1/2" Circular Saw - With double-reduction gearing for high torqueLight - Comes with xenon bulb for excellent illumination
Ridgid ZRR2400 Factory Reconditioned Heavy-Duty Variable-Speed Laminate Trimmer
Available at Tool King for only $ 78.99 (USD)
Electronic Feedback - For consistent speed and powerReplaceable Brushes - Easily accessible external brush capsVariable Speed - Adjust speed to material type and application6 Amp Permanent Magnet Motor™ - For extra power in a compact sizeDepth Scale -Easy to read for quick set-upThumb Wheel Depth Adjustment - For easy depth setting1/4" Collet - Accepts most 1/4" bitsDie Cast Base - For greater durability and longevityToggle Switch - Features a soft start to prolong motor life and give the operator more controlLighted Plug - Helps easily identify live toolsEdge Guide - Keeps the bit a certain distance from the edge of a straight workpieceBearing Guide Assembly - Can be used to guide the bit on curved workpieces
Ridgid ZRR7121 Factory Reconditioned Heavy-Duty 1/2-Inch Reversible Spade Handle Drill
Available at Tool King for only $ 124.99 (USD)
9-Amp Heavy-Duty Motor with Hardened-Steel Gears - Ensures tool longevitySpade Handle - Has 2 positions for control tailored to the projectTriple Gear Reduction - Increases torque for use with large diameter accessories5/8" Spindle - For increased strength in high torque applicationsEasily-Accessible Brushes - Can be serviced quickly for minimum down timeLock-On Button - For continuous drilling or mixingForward/Reverse Rocker Switch - Use for drilling or backing out jammed bitsAuxiliary Handle - Has 3 positions for ease of operation and to prevent loss of control12' All-Rubber Power Cord with Built-In Cord Wrap - For durability and convenient storage when not in useLighted Plug - Helps easily identify live tools
Ridgid ZRR7110 Factory Reconditioned Heavy-Duty 1/2-Inch Variable-Speed Reversible Rear Handle Drill
Available at Tool King for only $ 75.99 (USD)
8.5-Amp Motor with Hardened-Steel Gears - Ensures tool longevitySingle-Sleeve Keyless Chuck - Allows you to hand-tighten or release the drill bitLock-On Button - Convenient when drilling for extended periods of timeAll-Metal Gear Case - For durability360 Side Handle - Can be repositioned or moved for best use with application12' All-Rubber Cord with Built-In Cord Wrap - For durability and easy storage when not in useDirection of Rotation Selector - To change direction of bit rotation for versatilityLighted Plug - Easily identifies live toolsErgonomic 2-Finger Trigger - For comfortable and easy handlingErgonomic Soft-Grip Handle - For added comfort
Ridgid ZRR9213 Factory Reconditioned 18-Volt Cordless 4-Piece Combo Kit
Available at Tool King for only $ 219.99 (USD)
Hammer Drill/Driver - ZRR8411503Locking Single-Sleeve Carbide Chuck - To hold bits securelyHigh-Torque 2-Speed Transmission - For matching power to the taskHigh-Impact Torque-Adjustment Ring, 24-Position Clutch - For durability and lighter weightHigh-Speed Gearbox with Hammer Function - For masonry and concrete workAutomatic Spindle Lock - Makes bit changes easierReciprocating Saw - ZRR8442Tool-Free Blade Clamp - For quick blade changesPivoting Shoe - Adjusts for cuts at almost any angleVariable-Speed Switch with Brake - For the right speed to suit the taskCircular Saw - ZRR8452Aluminum Guard and Base - For high strength and low weight6-1/2" Carbide-Tipped Blade - For increased cutting capacitySpindle Lock - For easier blade changesDouble-Reduction Gearing - For increased torqueWork Light - ZRR849Very Bright Swivel Light - Direct light in any direction to illuminate the darkest spaces
Robinair 43230 Swivel-Head Digital Thermometer
Available at Tool King for only $ 25.99 (USD)
The Robinair 43230 is a Swivel-Head Digital Thermometer. The digital thermometer gives user full-feature capabilities in a case which is small enough to fit in shirt pocket. A wide temperature range and highly accurate readings make it useful for a variety of applications. The head on this digital thermometer swivels, making it easy to see readings at any angle. The compact size is convenient to carry and store. It has easy-to-read display which can be read even in direct sunlight. The durable case includes a cover to protect the probe. Min/Max display for reading temperature ranges.
Robinair 16253 R-134a Fluorescent Dye - 12 Pack
Available at Tool King for only $ 38.99 (USD)
The Robinair 16253 is a 12 Pack of R-134a Fluorescent Dyes. The replacement Fluorescent dye is designed to give best performance with Robinair leak detection system. It shines a bright yellow or yellow-green in UV light.
Robinair 15434 CoolTech 2-Stage Vacuum Pump, 1/3 HP, 4 CFM
Available at Tool King for only $ 299.99 (USD)
The Robinair 15434 is a CoolTech 2-Stage Vacuum Pump. It has heavy-duty motor and high torque design for easy startup and efficient operation. The oil fill port makes adding oil simple since the port is accessible from the front or either side. It has a sight glass on the front of the pump which shows user when enough oil has been added. The durable polycarbonate mobile base improves pump balance and minimizes vibration during operation. Gas ballast moisture laden air passing through the pump mixes with relatively dry air to such a degree that compression does not cause condensation. Its two-stage design cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so user can pull a deeper, ultimate vacuum.
Robinair 15500 VacuMaster 2-Stage Vacuum Pump, 1/3 HP, 5 CFM
Available at Tool King for only $ 290.99 (USD)
The Robinair 15500 is a VacuMaster 2-Stage Vacuum Pump. It has heavy-duty motor and high torque design for easy startup and efficient operation. The oil fill port makes adding oil simple since the port is accessible from the front or either side. It has a sight glass on the front of the pump which shows user when enough oil has been added. The durable polycarbonate mobile base improves pump balance and minimizes vibration during operation. Die-Cast aluminum housing makes the pumps lightweight but durable. Its two-stage design cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so user can pull a deeper, ultimate vacuum.
Robinair 75240 Coolant and Battery Refractometer
Available at Tool King for only $ 45.00 (USD)
The Robinair 75240 is a Coolant and Battery Refractometer. It can be used for measuring the freezing point of either propylene or ethylene glycol based cooling systems. It can also be used for checking the strength of electrolyte solution batteries. The precision instrument features high-quality optics with ultra smooth focusing.
Robinair 18021 A/C Clutch Plate Remover Kit
Available at Tool King for only $ 88.99 (USD)
The Robinair 18021 is a A/C Clutch Plate Remover Kit. The handy kit contains clutch plate removers for a variety of popular A/C compressors. These tools can be used both for removing the clutch plate to gain access to the shaft seal and for re-installing it. The compact design makes it possible to work in tight spots and, in many cases; the tool can be used with the compressor mounted on the vehicle.
Robinair 82020 TSS Cleaning Solvent - Case of 12
Available at Tool King for only $ 182.99 (USD)
Case of 12 bottles. Each bottle contains 16oz. of fluid. Each bottle treats one vehicle. For use with Robinair's TSS machine (ROB82000).
Robinair 17492 Vinyl Dust Cover
Available at Tool King for only $ 55.99 (USD)
The Robinair 17492 is a Vinyl Dust Cover for 342000, 17700-2K, 34700-2K, 34134Z, 34700Z, 34711-2K, AC375, AC375A, 17700Z and 34702Z. The heavy-duty vinyl dust cover protects the investment. It features corded seams for durability; medium gray color with CoolTech logo.
Robinair 16600 Electronic Refrigerant Leak Detector
Available at Tool King for only $ 129.99 (USD)
The Robinair 16600 is an Electronic Refrigerant Leak Detector. It has 16" gooseneck probe which holds its position so user can operate the detector with one hand. An alarm increases in frequency as the tip gets nearer to a high concentration of refrigerant. The threshold balancing control gives user infinite control for eliminating background contamination so user can zero in on the leak site. The audible leak signal can be adjusted to the volume that's right for the background noise in the shop or at the job site.
Robinair 75700 CoolTech Coolant Exchanger
Available at Tool King for only $ 1729.99 (USD)
The Robinair 75700 is a CoolTech Coolant Exchanger. It features 10 minute exchange process which means no more waiting for the engine to warm up. The engine off feature removes pulleys, belts and fan blades from the safety equation. The vacuum mode creates a push/pull exchange process allowing the technician to safely remove high pressure in a hot system. The Hands-off transfer of used coolant to a bulk tank prevents spills and helps protect the technician. It has two clearly marked valves and an easy-to-read gauge which make the machine very easy to use. The sight glass clearly shows the amount of coolant in the waste tank.
Robinair ROB41640 Side Wheel Manifold with Enviro-Guard Hoses and Quick Seal Fittings
Available at Tool King for only $ 88.99 (USD)
The Robinair ROB41640 is a Side Wheel Manifold with Enviro-Guard Hoses and Quick Seal Fittings. The side wheel manifold is ready for almost every job, instead of carrying several manifolds with 1/4" fittings. The gauges show R-22 and R-134a temperature scales. The flexible holster provides protection against the bumps and knocks of everyday use. The pressure temperature chart stores in a slot on the back which gives multiple refrigerant capability.
Robinair 17506 50 lbs Refrigerant Tank
Available at Tool King for only $ 169.99 (USD)
The Robinair 17506 is a 50 lbs Refrigerant Tank. The 50 lbs tank has 1/4" fittings. It is for 17800A, 17800-2K, 17700A, 25150, 25175, 25200B series.
Robinair 17680-2K Universal Recovery Station for Contaminated or Mixed Refrigerant
Available at Tool King for only $ 1853.99 (USD)
The Robinair 17680-2K is a Universal Recovery Station for Contaminated or Mixed Refrigerant. It is a recovery-only unit designed for quickly capturing contaminated or unknown refrigerants, mixtures and blends, including sealants. It protects the recovery/recycling equipment and shops refrigerant supply. It can be recovered into one 50 lbs tank for collection and off-site disposal (mixtures and blends cannot be recycled). It is simple to hook up and operate with instructions printed on the control panel for quick reference. The refrigerant collected should not be used in any A/C system. When the tank is full, it should be sent to a disposal facility.
Robinair 13172 Spin-On Filter Maintenance Kit
Available at Tool King for only $ 56.99 (USD)
The Robinair 13172 is a Spin-On Filter Maintenance Kit. It is used for keeping recovery and recycling units operating at peak efficiency with a convenient maintenance kit. It contains one quick change filter-drier to be used on both R-12 and R-134a stations and one 16 oz. bottle of premium high vacuum pump oil. The kit is for early models using 34724 Filter-Drier (17700A, 17700-2K, 34700, 34700-2K, 34800, 34800-2K, 34900 Series).
Robinair 34700Z R134A Cool-Tech Recovery/Recycle/Recharge Unit for R-134a
Available at Tool King for only $ 3399.99 (USD)
The Robinair 34700Z is a R134A Cool-Tech Recovery/Recycle/Recharge Unit for R-134a. The automatic air purge eliminates damaging air without any monitoring of gauges or opening of valves. The unit automatically drains system oil captured during recovery and the display reminds user to empty the bottle. The calibrations on the container clearly show user how much oil needs to be replaced. The scale is mounted internally for protection and has a dampening mechanism that protects against impact shocks such as movement over rough surfaces. The scale weighs recovered refrigerant and charges by weight for greatest accuracy. The refrigerant is recovered into and charged out of this vessel, which is permanently mounted to the electronic scale for continuing reliability.
Robinair 41620 R12 Side Wheel Manifold with Standard Hoses
Available at Tool King for only $ 64.99 (USD)
The Robinair 41620 is a R12 Side Wheel Manifold with Standard Hoses. It can be used with 41600 for almost every job, instead of carrying several manifolds with 1/4" fittings. The gauges show R-22 and R-134a temperature scales. Flexible holster provides protection against the bumps and knocks of every day use. The pressure temperature chart stores in slot on the back. It gives multiple refrigerant capabilities. The face seal valves give a tight seal, less wear and improved flow.
Robinair 40134A R-134a Side Wheel Manifold with Hoses
Available at Tool King for only $ 106.00 (USD)
The Robinair 40134A is a R-134a Side Wheel Manifold with Hoses. The solid forged brass bar is long-lasting and durable with proven face seal valves. It has new universal gauges featuring easy-to-read dial faces which show R-134a temperatures in degrees Fahrenheit, plus pressures in PSI and kPa. The flexible holster protects the manifold during use and storage. The pressure temperature chart stores in a slot on the back of the manifold; gives user multiple refrigerant capabilities.
Robinair 39072A 3-Pc 1/4" x 72" Charging Hose Set with Quick Seal Fittings
Available at Tool King for only $ 55.99 (USD)
The Robinair 39072A is a 3-Pc 1/4" x 72" Charging Hose Set with Quick Seal Fittings. The set includes one each red, blue & yellow 72" hoses with quick seal fittings. It has working pressure of 500 PSI and burst pressure of 2500 PSI.
Robinair 18065 R12 Refrigerant Oil Injector with 1/4" SAE Fitting
Available at Tool King for only $ 44.99 (USD)
The Robinair 18065 is a R12 Refrigerant Oil Injector with 1/4" SAE Fitting. It is used to add refrigeration oil to an A/C system during service. It is especially handy with flushing or retrofits when all oil has been removed from the system. The injector takes just seconds to transfer an oil charge while the system is in a vacuum. The injectors are great add-ons to recovery/recycling and charging.
Robinair 17800B Refrigerant Recovery/Recycling Unit for Multiple Refrigerants
Available at Tool King for only $ 5299.99 (USD)
The Robinair 17800B is a Refrigerant Recovery/Recycling Unit for Multiple Refrigerants. It recovers, recycles, evacuates and recharges R-12, R-134a, R-22, R-502 MP and HP blends and many more. It is ideal for refrigerated trailers, buses, RVs with multiple refrigerants. The microprocessor controlled functions prompts user through programming and signal preventative maintenance. Float chamber automatically adjusts from liquid to vapor for most efficient recovery. The electronic scale makes it simple to recharge to factory specifications; also weighs recovered refrigerant and provides tank overfill protection. 6 CFM Cool-Tech vacuum pump has the capacity to thoroughly evacuate system. Its lockout panel prevents mixing of refrigerants; slides to one side for 1/4" fittings and to the other for 1/2" Acme fittings. Additional recycling can be programmed in case of compressor burn-out or other conditions. The heavy-duty filter-drier removes moisture and acid from the refrigerant; can handle up to 300 lbs between changeovers.
Robinair 17622 A/C System Sealant Remover
Available at Tool King for only $ 158.99 (USD)
The Robinair 17622 is a A/C System Sealant Remover. It removes sealant, dye, lubricant and other contaminants from refrigerant prior to entering the recovery unit. The A/C System Sealant Remover is used with recover, recycle and recharge units that have external or internal manifold pressure gauges. It works with refrigerant in either a gas or a liquid state and adds to the life expectancy of the recovery unit.
Robinair 16910 Cool-Tech ID Plus Refrigerant Identifier
Available at Tool King for only $ 1479.99 (USD)
The Robinair 16910 is a Cool-Tech ID Plus Refrigerant Identifier. The Robinair's Cool Tech ID Plus Refrigerant Identifier provides the user with a complete tool to identify refrigerant mixtures and rid the mixtures of air contamination all housed in a portable, rugged carrying case. The identifier provides a fast, easy and accurate means to determine refrigerant purity in refrigerant storage cylinders or directly in vehicle air conditioning systems. It also determines the need and controls the purging of ambient air-based NCG from refrigerant storage vessels or vehicle air conditioning systems. The instrument utilizes non-dispersive infrared (NDIR) technology to determine the weight concentrations of refrigerant types R-12, R-134A, R-22, hydrocarbons and air. Refrigerant purity is automatically determined for refrigerants R-12 and R-134A by the instrument to eliminate human error. Pure refrigerant is defined as a refrigerant mixture that contains 98% by weight or greater, of either R-12 or R-134A. The instrument provides the option to purge sample refrigerant sources of air contamination down to levels set by the user. Air purging is completely automatic and requires no intervention by the user other than telling the instrument to begin the purging process. The instrument is supplied complete with R-12 and R-134A sample hoses, an R-134A adapter fitting to permit sampling of ACME ported cylinders, a purge vent hose, a connected power cord and all required plumbing housed within a rugged portable case.
Robinair 15600 CoolTech 2-Stage Vacuum Pump, 1/2 HP, 6 CFM
Available at Tool King for only $ 349.99 (USD)
The Robinair 15600 is a CoolTech 2-Stage Vacuum Pump. It has heavy-duty motor and high torque design for easy startup and efficient operation. The oil fill port makes adding oil simple since the port is accessible from the front or either side. It has a sight glass on the front of the pump which shows user when enough oil has been added. The durable polycarbonate mobile base improves pump balance and minimizes vibration during operation. Gas ballast moisture laden air passing through the pump mixes with relatively dry air to such a degree that compression does not cause condensation. Its two-stage design cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so user can pull a deeper, ultimate vacuum.
Robinair 34065 R-134a Oil Injector with 1/2" Acme Fitting
Available at Tool King for only $ 48.99 (USD)
The Robinair 34065 is a R-134a Oil Injector with 1/2" Acme Fitting. It takes just seconds to transfer an oil charge while the system is in a vacuum. The injector is great add-ons to recovery/recycling and charging. It is made of durable polypropylene with oil levels marked in ounces and milliliters. It features solid brass fitting with a Lexan handwheel.
Robinair 18190A Blue Low Side Manual Coupler for Automotive R-134a Systems
Available at Tool King for only $ 34.99 (USD)
The Robinair 18190A is a Blue Low Side Manual Coupler for Automotive R-134a Systems. The field service coupler connects to Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems. The quick-connect design has an integral safety sleeve, which protects against injury and refrigerant loss if the coupler is disconnected under pressure. The compact design easily fits into tight quarters, which is especially handy for retrofits. Six-ball coupler provides a more stable grip on the fitting than do coupler with four balls.
RoboToolz RT-2350-20 20x Transit Level
Available at Tool King for only $ 214.99 (USD)
The RoboToolz RT-2350-20 20x Transit Level is a sturdy and easy to use instrumen. It is useful for outdoor horizontal level, plumb and grade applications. The tool comes with a automatic wire hung compensator, easy to use large control knobs, and focusing eyepiece that allow for quick and easy set-up.
RoboToolz RT-A1150 Adjustable Aluminum Contractor Tripod
Available at Tool King for only $ 52.99 (USD)
The RoboToolz RT-A1450 Adjustable Aluminum Contractor Tripod is a sturdy lightweight, rugged aluminum tripod. It is used for indoor and outdoor applications. Its aluminum leg extensions maintain complete contact with outer legs for added stability and durability.
RoboToolz RT-A1450 9' Grade Rod
Available at Tool King for only $ 44.99 (USD)
The RoboToolz RT-A1150 9' Grade Rod is constructed of heavy duty metal for durability. It has a flexible, durable aluminum with reinforcing ribs, has a easy set up and takedown. The 3 telescoping sections lock securely together.
RoboToolz RT-5250-2X Electronic Self-Leveling Level and Manual Plumb Rotational Laser Kit with Detector
Available at Tool King for only $ 389.99 (USD)
The RoboToolz RT-5250-2X Electronic Self Leveling Rotary Laser Kit and Detector, High Power, 2 Beam is high powered laser that provides the construction professional with all the benefits of a self leveling laser level and the flexibility of 90 plumb beam capability. The electronic operated automatic leveling mechanism eliminates set up time and guarantees accuracy and the repeatable transfer of points to multiple locations.
Rocky Mountain Saw 61-053300 44-7/8" x 1/2" x 10/14 TPI Porta-Band Saw Blade
Available at Tool King for only $ 4.65 (USD)
8% Cobalt cutting edge increases cutting edge lifeNew robust tooth design provides faster cutting ratesProprietary heat treating for greater tooth tip "toughness"
Rocky Mountain 61603000 1/2" 18 TPI Matrix Plus Bi-Metal Band saw Blade
Available at Tool King for only $ 17.33 (USD)
The Rocky Mountain 61603000 is a 1/2" 18 TPI Matrix Plus Bi-Metal Band saw Blade. This blade has proprietary manufacturing process which optimizes the performance of the cutting edge. Improved toothing process lowers cost per cut through longer blade life. It has 8% cobalt high-speed wire with shock absorbing and durable edge minimizes tooth stripping. The customized rake angles provide aggressive and tough tooth tips-for longer blade life. Tooth tip hardened to 65 Rc to 67 Rc.
Rocky Mountain Saw 61-051400 44-7/8" x 1/2" x 14 TPI Porta-Band Saw Blade
Available at Tool King for only $ 4.65 (USD)
8% Cobalt cutting edge increases cutting edge lifeNew robust tooth design provides faster cutting ratesProprietary heat treating for greater tooth tip "toughness"
Rocky Mountain Saw 61-051800 44-7/8" x 1/2" x 18 TPI Porta-Band Saw Blade
Available at Tool King for only $ 4.65 (USD)
8% Cobalt cutting edge increases cutting edge lifeNew robust tooth design provides faster cutting ratesProprietary heat treating for greater tooth tip "toughness"
Rocky Mountain 3746000 64 1/2" Metal Cutting Band Saw Blade
Available at Tool King for only $ 7.80 (USD)
Rocky Mountain 3746000 64 1/2" Metal Cutting Band Saw Blade. For use with Jet Horizontal Band Saws.
Rol-Air D2000HPV5 2 HP Electric Air Compressor, 3400 RPM
Available at Tool King for only $ 384.99 (USD)
-The Rol-Air D2000HPV5 is a 2 HP Electric Air Compressor. The compressor has overload protection with manual reset. It has heavy-duty industrial grade ball bearings for greater durability.
Ryobi ZRP400 Factory Reconditioned 18V CornerCat Finish Sander, 11000 OPM
Available at Tool King for only $ 21.99 (USD)
The Ryobi ZRP400R is a Factory Reconditioned 18V CornerCat Finish Sander. It has 11000 orbits-per-minute speed which removes stock quickly and efficiently. Its pointed pad shape with ample area provides easy access to corners and details, yet sands large areas with speed and ease. The orbital action produces a virtually swirl-free finish.
Saw Trax SPHD100 Spring Hold Down - 100"
Available at Tool King for only $ 194.99 (USD)
Holds thinner materials against frame for more material support. Recommended for materials 1/4" or less. Does not have to be removed when cutting thicker materials.
Saw Trax FS64SM Sign Maker's Panel Saws
Available at Tool King for only $ 2719.99 (USD)
Never Goes Out of Square 10' wide powder-coated, steel frame 64" maximum cross cut Use circular saw, knife cutter, and router in the same carriage 7" Blades with tool-less blade change Perfect for Sign Shops and Picture FramersShown with optional full mid-fence
Saw Trax KCWP Knife Cutting Attachment
Available at Tool King for only $ 179.99 (USD)
Slices through corrugated plastics such as Coroplast®, foamboard, cardboard or drywall. Rips and Cross cuts. Unique carriage design allows user to switch from saw to knife to router in a matter of seconds. Knife retracts while on the plate for added safety when swapping tool plates. Does not require a backerboard.
Saw Trax C52SM Compact 52 Sign Maker's Package
Available at Tool King for only $ 1999.99 (USD)
Never Goes Out of Square5' wide powder-coated, steel frame52" maximum cross cutUse circular saw, knife cutter, and router in the same carriage7" Blades with tool-less blade changePerfect for Sign Shops and Picture FramersShown with optional full mid-fence
Saw Trax 100KT 100" Panel Saw Kit
Available at Tool King for only $ 1139.99 (USD)
Build your own overhead table or wall saw.Mounts vertically or horizontally.
Saw Trax 2076 2000 Series Heavy Duty Panel Saw - 10' Frame, 76" Crosscut
Available at Tool King for only $ 3359.99 (USD)
Never Goes Out of Square 10' wide powder-coated, welded steel frame 76" maximum cross cut Use circular saw, knife cutter, and router in the same carriage Uses standard 7" Blades Perfect for serious woodworkers and high-production facilities Add a Floating Router Plate for dados
Saw Trax 52KT 52" Panel Saw Kit
Available at Tool King for only $ 449.99 (USD)
Build your own overhead table or wall saw.Mounts vertically or horizontally.
Saw Trax 1064 1000 Series Heavy Duty Panel Saw - 10' Frame, 64" Crosscut
Available at Tool King for only $ 2549.99 (USD)
Never Goes Out of Square 10' wide powder-coated, welded steel frame 64" maximum cross cut Use circular saw, knife cutter, and router in the same carriage 7" Blades with tool-less blade change Perfect for woodworkers and cabinet shops alike Add a Floating Router Plate for dadosShown with optional full mid-fence
Saw Trax 3062 62" Heavy Duty Plus 3000 Series
Available at Tool King for only $ 4019.99 (USD)
Never Goes Out of Square2.5" Depth of Cut10' wide powder-coated, welded steel frame62" maximum cross cutUses standard 10 " BladesPerfect for serious woodworkers and high-production facilities
Saw Trax 1052 1000 Series Heavy Duty Panel Saw - 10' Frame, 52" Crosscut
Available at Tool King for only $ 2359.99 (USD)
Never Goes Out of Square 10' wide powder-coated, welded steel frame 52" maximum cross cut Use circular saw, knife cutter, and router in the same carriage 7" Blades with tool-less blade change Perfect for woodworkers and cabinet shops alike Add a Floating Router Plate for dadosShown with optional full mid-fence
Saw Trax 76KT 76" Panel Saw Kit
Available at Tool King for only $ 924.99 (USD)
Build your own overhead table or wall saw.Mounts vertically or horizontally.
Saw Trax DRGS Dual Rip Gauges
Available at Tool King for only $ 34.99 (USD)
Easily set and make horizontal cuts Dual pointers allow user to rip from either direction Spring located at the bottom of the tape band keeps the tape taut and precise. Standard on the Varsity, 1000, 2000, and 3000 Series Vertical Panel Saws
Saw Trax RTCU Spinning Saw Insert
Available at Tool King for only $ 119.99 (USD)
Allows user to switch from cross cut to rip cut position without removing saw plate Standard on the 2000 & 3000 Series Vertical Panel Saws
Saw Trax SBMT Stop, Bar, and Measuring Tapes
Available at Tool King for only $ 84.99 (USD)
Easily set and make repetitive vertical cuts. Includes right and left tapes with stop and stop extension. Standard on Varsity, 1000, 2000, and 3000 Series Vertical Panel Saws
Saw Trax IDPL Industrial Dust Collection Hook Up for Frame
Available at Tool King for only $ 129.99 (USD)
Connect an industrial dust collector (not included) to the bottom of your panel saw. Catches residual dust that falls down the dust pan. Only available on NEW Saw Trax models. Pair with the Premium Dust Collection Upgrade (DCPU) for the best results.
Saw Stop ICS53480 10 Inch Professional Cabinet Saw 5 HP 480V Three Phase
Available at Tool King for only $ 3918.98 (USD)
ToolKing.com is authorized to sell SawStop products only to customers residing in the state of Colorado. Colorado customers can pick up this product at our Lakewood retail showroom or have it shipped in-state via freightliner. If you are consider purchasing a SawStop, please call our Industrial Sales department at 1-800-696-TOOL ext. 202. SawStop price includes freight charges within the state of Colorado for all in-stock saws.SawStop has designed this saw to be the best cabinet saw made. The SawStop cabinet saw has all the features you expect in a cabinet saw including: enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and three or five horsepower motors. In addition, the SawStop cabinet saw has a main bearing 50% larger than the Delta Unisaw, a European-style riving knife for improved kick-back prevention, and of course SawStop's revolutionary contact detection and brake system.
SawStop CBFA1055200 52" T-Glide Fence and Rails
Available at Tool King for only $ 369.99 (USD)
Precision T-style designHeavy-Duty Welded ConstructionEasily adjustable and removable face plates with high gloss melamine surfacesSmooth glide motion over heavy duty 52 inch rails (included)Optional extension table with laminate surfacesDual measuring scales for positioning the fence on either the right or the left of the bladeStrong, ergonomic locking handlePowder coated finish
SawStop TSDC-8R2 8" Dado Brake Cartridge for ICS Saws
Available at Tool King for only $ 89.00 (USD)
Revolutionary SawStop protectionCompatible with all standard 8" dado sets up to13/16" thickCompatible with all woods and other non-conductive materials
Saw Stop ICS53230 10" Professional Cabinet Saw 5 HP 230V 3 Phase - Saw Body Only
Available at Tool King for only $ 3918.98 (USD)
ToolKing.com is authorized to sell SawStop products only to customers residing in the state of Colorado. Colorado customers can pick up this product at our Lakewood retail showroom or have it shipped in-state via freightliner. If you are consider purchasing a SawStop, please call our Industrial Sales department at 1-800-696-TOOL ext. 202. SawStop price includes freight charges within the state of Colorado for all in-stock saws.SawStop has designed this saw to be the best cabinet saw made. The SawStop cabinet saw has all the features you expect in a cabinet saw including: enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and three or five horsepower motors. In addition, the SawStop cabinet saw has a main bearing 50% larger than the Delta Unisaw, a European-style riving knife for improved kick-back prevention, and of course SawStop's revolutionary contact detection and brake system.
SawStop CB104267 Dado Zero Clearance Insert for 8" Dado Blades
Available at Tool King for only $ 34.99 (USD)
Only available for purchase in the state of Colorado. -Precision machined from a high-quality hardwood stock -Sanded to a silky, flat finish -Positioning screws and lock-down screws ensure a solid and precise fit in the table
SawStop ICS73230 10 Inch Professional Cabinet Saw 7.5 HP 230V Three Phase
Available at Tool King for only $ 3749.00 (USD)
ToolKing.com is authorized to sell SawStop products only to customers residing in the state of Colorado. Colorado customers can pick up this product at our Lakewood retail showroom or have it shipped in-state via freightliner. If you are consider purchasing a SawStop, please call our Industrial Sales department at 1-800-696-TOOL ext. 202. SawStop price includes freight charges within the state of Colorado for all in-stock saws. SawStop has designed the SawStop ICS73230 10 Inch Professional Cabinet Saw to be the best cabinet saw made. The SawStop ICS73230 cabinet saw has all the features you expect in a cabinet saw including: enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and three or five horsepower motors. In addition, the SawStop cabinet saw has a main bearing 50% larger than the Delta Unisaw, a European-style riving knife for improved kick-back prevention, and of course SawStop's revolutionary contact detection and brake system.
SawStop TSBC-10R2 10" Standard Brake Cartridge for ICS Saws
Available at Tool King for only $ 69.00 (USD)
Revolutionary SawStop protectionCompatible with all standard 10" bladesCompatible with all woods and other non-conductive materials
SawStop DBC8001 8-Inch Dado Brake Cartridge for CB Saws
Available at Tool King for only $ 89.00 (USD)
The SawStop DBC8001 is a Dado Replacement Brake Cartridge for first-generation SawStop saws. The cartridge consists of a spring, fuse wire and brake pawl. The DBC8001 stops the blade, retracts the blade below the table surface in 1/200th (3-5 miliseconds) of a second, and shuts down the power for increased safety.
Senco SFW10XP-E 3/8” to 5/8” leg Fine Wire Stapler
Available at Tool King for only $ 158.99 (USD)
The Senco SFW10XP-E durable, fine-wire air powered tool is designed for professional performance. It has a 3/16 crown and drives staples ranging in length from 3/8 to 5/8. It has excellent features for user comfort, resulting in greater production output.
Senco Y07BFA 7/16" Senclamp Fasteners for SC1, Box/3000
Available at Tool King for only $ 74.99 (USD)
-Fits Senco SC1 Tool
Senco FP35 FinishPro 15 Gauge Finish Nailer
Available at Tool King for only $ 234.99 (USD)
The FinishPro 35 angled finish nailer's lightweight, well-balanced construction enables the users to work all day by reducing fatigue and increasing productivity. The FinishPro 35 drives 1-1/4" 2-1/2" finish nails for maximum versatility.
Senco SLS18 1/2" to 1-1/2" 18-Gauge Finish Stapler
Available at Tool King for only $ 124.99 (USD)
The versatile SLS18 finish stapler weighs just 2.9 lbs, but can drive 1/2" 1-1/2" staples into hard woods. With either a dual or restrictive trigger, user can choose between high productivity or precision placement, making it the ideal stapler for a wide range of applications.
Senco Cordless 41 Cordless Finish Nailer
Available at Tool King for only $ 459.99 (USD)
-The new SENCO all battery-powered Cordless Finish 41 allows you to quickly attack a variety of Finish and Trim projects. Now available with a switchable drive control for use in sequential or contact actuation mode. Since compressor set-up is not required all SENCO Cordless Tools are perfect for punch list jobs. Capable of driving up to four nails per second and 600 nails per battery charge there is plenty of power and speed to keep pace with your work. Nicely balanced and easy to use, the Cordless Finish 41 drives 15 gauge nails from 1" to 2½". All this is backed by a new durable drive system, adjustable depth-of-drive control, EZ-Clear®, and a no-mar pad for perfect finishing.
Senco SFW10XP-B 1/4” to 1/2” leg Fine Wire Stapler
Available at Tool King for only $ 158.99 (USD)
The Senco SFW10XP-B durable, fine-wire air powered tool is designed for professional performance. It has a 1/2 crown and drives staples ranging in length from 1/4 to 1/2. It has excellent features for user comfort, resulting in greater production output.
Senco SG2500 VSR 2500 RPM Heavy Duty Drywall/Framing Screwdriver
Available at Tool King for only $ 109.99 (USD)
Senco SG2500 is a Drywall/Framing Screwdriver. This rugged DuraSpin screwdriver is the ideal tool for users who require power, speed and versatility. The SG2500 tool features a high-torque, variable-speed reversing motor to tackle tough drywall and wood screw applications.